Q: Useful Unboxing videos

${youtube}<a href="n-37WWDrju0">Unboxing Freego DK200</a> ${youtube}<a href="VDuBr04TO_8">Unboxing Freego F1</a> ${youtube}<a href="u_FCBQv008M?si=glRIoQBzwiaRykOT">How is Freego F1? See its Performance</a>

Question 1

How to Interpret and Deal With Instrument Fault Codes

Accepted Answer

G51 Display Fault Code（Suitable for models: :F1，F1Pro，F2，F2Pro，DK200，DK200Pro）

**E02: **Brake Lever Fault; The brake lever is broken **Solution: **Remove the brake lever cable; If the fault code disappears, replace the brake lever
**E07: **Motor Fault;

1. Check if the motor wires are damaged;
2 Re plug and unplug the motor cable;
3. Replace the motor. **Solution: **Replace the motor

**E08: **Throttle Fault;

1. The throttle lever did not return to its original position before starting up;
2. The plug of the throttle lever cable is loose;
3. The throttle lever is broken. **Solution: **Replace the throttle

**E09: **Controller Malfunction; Is there a short circuit in the motor wire? The controller is broken? **Solution: **Replacing the controller
**E10: **Communication Reception Failure;

1. Unplug all the wires on the meter and controller and plug them back in;
2. After idling the rear wheel, suspend the rear wheel and turn the foot pedal. Does the meter display the speed? Does the rear wheel emit electrical noise?
3. The controller or motor is broken. **Solution: **Replace the controller or motor

YL81F Display Fault Code（Suitable for models: F3PRO,F3PRO MAX）

**br0000: **Brake Lever Fault; Does the brake lever return to its original position? **Solution: **Replace the brake lever
**E001: **Controller Malfunction; Check the connection of each line in the controller, unplug it and plug it back in. **Solution: **Replace the c

Question 2

Bicycle Common Issues and Solutions

Accepted Answer

The following are common issues with electric bicycles. We will provide solutions based on the reasons for the malfunctions and the inspection steps. | 1. **Fault: **Motor Noise; Reason: Motor or Controller **Detection Steps: **

1. Is there a fault code in the instrument?
2. Check if the motor cable is properly connected and unplug it again;
3. Does the ebike emit electrical noise? Does the instrument display speed? **Solution: **Replace the controller or motor

| 2. **Fault: **Twist the throttle knob, the ebike doesn't work; Reason: Throttle / Controller / Motor **Detection Steps: **

1. Ensure that the speed level is 1-5, if it is 0, it cannot accelerate;
2. Does the meter display an exclamation mark or brake lever malfunction;
3. For some new models of F2Pro and F3pro, there are new features that lock the bike as soon as you open it Up, you need to brake once, then twist the throttle, it will unlock and work;
4. Check if the ebike emits an electric current sound, and replace the handle if there is an electric current sound;
5. If there is no current sound, it may be a motor or controller malfunction **Solution: **Replace the throttle, controller, or motor

| 3. **Fault: **The meter cannot be turned on; Reason: Meter / Battery **Detection Steps: **

1. Long press the M key to turn the accelerator, indicating that the meter85 is broken;
2. Measure the battery voltage with a multimeter. If it is far below 53V, it means the battery is b

Question 3

How is Freego F3 Pro Electric Motorcycle?

Accepted Answer

The famous YouTuber will tell you his comments, if you think this is too fast, don’t worry you can adjust its speed to 20mph.⬇

${youtube}How is Freego F3 Pro electric motorcycle?

Question 4

Useful Unboxing videos

Accepted Answer

${youtube}Unboxing Freego DK200

${youtube}Unboxing Freego F1

${youtube}How is Freego F1? See its Performance

Question 5

Why is there a loud noise from the rear wheel after turning on the bike, but the wheel doesn't spin?

Accepted Answer

This issue typically indicates a motor malfunction. When the motor produces a loud noise but the wheel doesn't turn, it's a clear sign that the motor is faulty. In this case, you don't need to check the power supply or the instrument panel. The solution is to replace the motor. You have two options:

Replace the Entire Motor: This can involve removing the spokes from the wheel and replacing the motor unit.
Replace the Core of the Motor: You can simply open the motor cover and replace the core component, known as the "Core of Motor," which is the central control part of the motor. Replacing just the core is often a simpler and more efficient solution.

Question 6

How do I read the numbers on the monitor?

Accepted Answer

It is correct to judge the fault of the bicycle through the digital code on the display, and all fault reports will be displayed on the display. Functional Description of Electronic Displays:

Display Function: Speed display, power-assisted gear display, power indicator, fault prompt, total mileage, single mileage, headlight display, single driving time display.
Control, Set Function: Power switch control, headlight switch control, maximum speed setting, idle automatic sleep time setting, backlight brightness setting, voltage level setting.
Communication Protocol: UART

1. Lamp (Press and hold " + " to turn on the headlights.) 2. Vehicle modes (POWER: Powerful mode.) 3. Battery level display (Schedule timely charging by battery level.) 4. Speed display area (The meter will calculate the real speed according to the wheel diameter and signal data, Maximum speed: MAX, Average speed: AVG Unit: MPH, KM/H) 5. VOL: Digital Voltage; **!: **Brake Tips; M: Motor Failure; Handlebar Failure; **ECU: **Controller Failure. 6. Multifunctional display area (Total Mileage: ODO、Single Mileage: TRIP、Error Code: Error、Power: WATT、Maintain etc.) 7. Vehicle status display area (Switch between KM and MILE.)

Featured & Frequently Read Articles

Browse All Categories